Skip to main content

Kyle Sikkema - From Final Hours With The Doc to Seeing Familiar Faces


It’s official. I am halfway done with my EXP trip, and I don’t think I could have fit many more activities
and work into the three weeks I’ve been here so far. Things are going wonderfully. Michigan has been
treating me well, and the weather has been immaculate.

Science-wise, not a ton has changed with the laser experiment. This week, Grace and I finalized our optics
setup by installing the Rubidium cell (basically an enclosed glass tube with Rubidium) in line with the laser’s path,
as well as place a photodetector at the end of the optics setup to get readings on the interactions with the laser
and the cell. I will get a picture next week when everything is aligned once again since this week was full of pain-staking
laser alignment. The caveat of using a Fabry-Perot involves SUPER precise alignment. There is a very small point
of entry that the laser beam can enter and exit through the cavity within the optic. Thankfully, Grace taught me the
most efficient and useful methods for aligning optics to be perfectly in line with the Fabry-Perot. The setup is about
95% complete, so after a few minor tweaks, I will be taking data and tracking the behavior of the light in the experiment.
I can’t wait to get back to work on Monday.

For the MDCS Analog project, I finished plotting data from my experimental run and interpreting it. Currently,
I am creating a powerpoint presentation together, which will be emailed to Chris for revision, and then Dr. Cundiff.
My involvement in this project is now delayed because of Chris’ departure, but there is another graduate student
named Albert, who was out this week on vacation, that will continue the project if there are loose ends that need to be tied up.
Otherwise, the MDCS Analog might be very close to being concluded, and I feel really great about my contribution
to the project, as limited as it may have been.

Here’s a little tribute picture to Chris, since he will no longer be working at the Cundiff Lab at UMich. He’s taught
me everything I need to know about the logistics behind 2D spectroscopy along with much more about everything
the Cundiff Lab is doing. Without his guidance, I would not have been able to comprehend any of the work I have
done so far. It’s been an amazing two weeks with him, and I will make sure to keep in touch with him as he continues
his career at San Jose State University. Stay safe out there on the west coast doc.




In other news, I met up with two amazing Peddie alumni: Alex Baum (‘15) and Conor Donohue (‘16). It was a
relief to be able to meet some fellow Falcons and enjoy a night outside of my apartment. Alex and Conor both hold
UMich in very high regard and are advocating for more Peddie kids to join the party. Since Alex and Conor
are a few years removed from Peddie, it is interesting to see their reactions to how Peddie has changed in the
short time they’ve been gone (although to be fair, Conor is still in the loop since he lives in Hightstown and is a
faculty kid). Alex was even kind enough to take me grocery shopping today, which was awesome and much needed.




That’s all I got. I’m anticipating a much lower attendance at the lab this week due to all the freedom that
will be in the air on July 4th, but I’m going to make the most of my time in solitude at the lab.

More to come, stay tuned. All good - KRS.
Labels:

Comments

Post a Comment

Popular posts from this blog

Evan Bradley, Week 3 at the Missouri Orthopaedic Institute

As mentioned in my previous blog, I have been awaiting ligament, menisci, and cartilage tissue from a canine or human knee joint for (interleukin) IL-1B tissue culture. IL-1B is an inflammatory cytokine that has been proven to increase rates of tissue degeneration and osteoarthritis development in the Thompson Lab. Dr. Stoker wants me to experiment with different types of knee tissues in a co-culture with varying levels of this cytokine to determine its effects on the entire knee joint. This co-culture uses an insert permeable to the media to separate the two tissue samples from physical contact, while allowing them to share the same media. This creates an extremely accurate model for knee tissues in their native environment due to their exposure to the same synovial fluid in the joint. This model would then be treated with the IL-1B and cultured for 21 days. During these 21 days, the media would be collected every three days for biomarker evaluation at the end of the stu...
Post a Comment
Read more

Kylie Heering, Week 2 at the Goldstein Lab

We started off our week with a congratulatory acai bowl trip to celebrate Preston’s acceptance into a training grant program. Acai bowls in California top Playa Bowls (no question about it). From what I can tell, its a pretty huge honor to be recognized by this grant, but he’s really humble about it. On Monday, Preston and I decided that testing antibodies that have never been tested on prostate epithelial cells before would be a good objective for my first Western blot on my own. We needed to probe for ASCT2, a glutamine transporter, and GLS in order to determine if their corresponding antibodies are functional. Antibodies are crucial for Western blots because they bind to the protein of interest (POI), allowing for us to qualify its expression after imaging. As such, Preston wanted to make sure they worked by probing for ASCT2 and GLS on three different cell lines. Cell lines are commercially purchased human cells that have been immortalized (modified to grow indefinitely) by telome...
Post a Comment
Read more

Daniel Cheng, In My Own Room

I had no idea that Pennsylvania is this wide. Within the first hour, my train had reached Philly. But to Pittsburgh, it took another seven. Even before I stepped foot into the Search-Based Planning Lab, I was waylaid by some anxious news. The PhD student assigned to be my mentor, Dhruv, texted me that he, Dr. Likhachev, and most of the lab would be out of town for the entire week. So that was that. Fortunately, it was my first week, the week to be spent learning new material, and Dhruv provided me with plenty to digest. I already had ROS (Robot Operating System) installed, so I looked towards the tutorials that ROS provided. I copied commands into my Linux laptop's terminal to run ROS features. I learned the basic structure of ROS: packages, services and clients, publishers and subscribers, messages, nodes, and topics (which nodes communicate messages over). There was one simple yet interesting program I came across in the tutorials called turtlesim, for which using only 2 comm...
3 comments
Read more