Skip to main content

Shelly Wu, Week 1

I started work this past Monday, June 11th. On the first day, I arrived at Hayden Hall, where the lab is located, a little bit earlier than Dr. Plante (My PI) did. I got into the building when he arrived, and we started working right away. He told me about a change in my project. My project is a based on the research of Liz Coward, one of Dr. Plante’s former PhD students. We planned to extract mineralized-carbon in soil samples, and then conduct thermal analysis on the residues to figure out the soil composition. However, as Dr. Plante was emailing Liz to settle on my project, Liz told him that she kept the residue samples of her extractions in the lab so that I did not have to conduct the extractions again. Dr. Plante decided that I could conduct a different kind of extraction, hot water extraction (HWE), and yield a new set of data. After everyone arrived, he introduced me to other people in the lab. Gabe is an undergrad from the University of Minnesota, and he works with Liz (not Liz Coward), a postdoc, on biochar. Kyle is an undergrad from UPenn working on black soils. I will be collaborating with Kyle for the first part of my project because we both need to conduct HWE. After that, Dr. Plante gave me some more papers to read. He encouraged me to read every day in order to have a good understanding of the field and my own project. In the afternoon, we spent some time going through the questions I had for the readings, and I wrapped up my day at around 4:30 p.m.

On Tuesday, I started going through the soil residue samples that Liz left behind. My job was to record the amount of residue left in each sample so that I could pick some samples for my project. It was tedious work. My head hurt after going through the 160 vials when I finished work that day. From this, I learned that science is fun, but there are tedious processes, too. The key to getting good results is to do every step meticulously, even the tedious ones.

On Wednesday, I attended the lunch meeting for undergrads doing research in Hayden over the summer. We introduced what we did in the past week, and talked about ways to approach readings and access to the databases in UPenn libraries. In the afternoon, Kyle and I went to the Biochemistry Library to find articles on HWE. Our task was to figure out the ratios of soil and water that other people used in their projects and create a protocol for our own HWE.

We spent Thursday reading papers and working on our protocol. On Friday, we started preparing the trash soil samples for HWE.

Next week, Kyle and I will each conduct HWE twice on the trash soil samples to make sure that the protocol we made is feasible. Then we will conduct HWE on our own soil samples.

My first week in the lab is fun. I learned so many things about doing research, not only weighing samples and pipetting solutions. I look forward to the following weeks.


Labels:

Comments

  1. UnknownJune 18, 2018 at 5:58 PM

    Sounds like an awesome first week! And yes, as you are learning, research can be monotonous and repetitive at times but it pays to be meticulous! Very cool that you are helping develop the protocol for the HWE - can't wait to hear about it tomorrow!

    ReplyDelete

Post a Comment

Popular posts from this blog

Kylie Heering, Week 2 at the Goldstein Lab

We started off our week with a congratulatory acai bowl trip to celebrate Preston’s acceptance into a training grant program. Acai bowls in California top Playa Bowls (no question about it). From what I can tell, its a pretty huge honor to be recognized by this grant, but he’s really humble about it. On Monday, Preston and I decided that testing antibodies that have never been tested on prostate epithelial cells before would be a good objective for my first Western blot on my own. We needed to probe for ASCT2, a glutamine transporter, and GLS in order to determine if their corresponding antibodies are functional. Antibodies are crucial for Western blots because they bind to the protein of interest (POI), allowing for us to qualify its expression after imaging. As such, Preston wanted to make sure they worked by probing for ASCT2 and GLS on three different cell lines. Cell lines are commercially purchased human cells that have been immortalized (modified to grow indefinitely) by telome...
Post a Comment
Read more

Alan - First Week at UCSF

Hi Everyone! After arriving in San Francisco last Sunday, I spent this past week settling into the downtown Berkeley apartment that I’ll be sharing with Rohit for the next couple of months, as well as learning my way around the Roy lab at UCSF. First day at the lab was really exciting. Here are a couple pictures of the Mission Bay campus, which was completed just a few years ago. Everything is super new and modern, and there’s still construction for other buildings going on around the campus. Most of the people who work at the Mission Bay campus are either professional researchers or doctors/nurses for the nearby hospital. The graduate students take most of their classes at the original Parnassus campus (where Maya is). I work in Byers Hall, which is connected to Genentech Hall and a short walk down the block from the shuttle stop. There are three other volunteers working for the Roy lab this summer – Kimmai, David, and Pujita, who are all undergrad college students...
1 comment
Read more

Wendy Li, Week 1

It is now early July and I have finally started my lab work. I arrived there at about 9 am on the very first day of my lab and found out that there were only two people in the office—Alex, a graduate student in engineering school, and me. “There should be more people in the office, but most of them went to a vacuum workshop today.” Alex told me. My work officially started at 10:30 am when my post doctor Subarna came to the lab. Familiarizing me with all the facilities in lab, Subarna first gave me a lab tour. Meanwhile, he showed me all the basic operations with vacuum chamber, ellipsometer, as well as the spin coater. During the rest of this past week, I was in the process of making my own films. I learned to cut Si wafer into 1*1 cm pieces and clean the surface of these Si wafer with duster and plasma which can effectively clean up all the extra organic particles from the wafer. Further, I prepared 10 percent polystyrene (PS 8000) toluene solution as the material for spin coating. ...
Post a Comment
Read more